S600 VDSL2 Tester 4KM/8KM TDR Fucntion, support DMM,OPM, VFL, Cable Tracker

S600 is multi-functional hand-held VDSL2 test instrument with small size, specially designed for xDSL line test (xDSL include: ADSL, ADSL2, ADSL2+, READSL, VDSL2 etc) and maintenance It provides xDSL test, PPPoE dial test, DMM test, Modem emulation, line voltage indication and so on. The tester adopts LCD display and menu operation which can display the test results directly and improve the xDSL broadband service greatly. It’s the best choice for the field operators of installation and maintenance. Also have TDR, Optical power meter, VFL, cable tracker, check line sequence function

Product Details

 

S600 Fiber and Copper Multi Tester

s6001.jpg


Features

1, 320*480 3.5 inch LCD

2, Test objects: ADSL; ADSL2; ADSL2+; READSL; VDSL2

3, Fast Copper tests with DMM (ACV, DCV, Loop and Insulation Resistance, Capacitance, Distance)

4, Support VLAN, Vectoring, Compliant with all known DSLAMs

5, Supports Modem emulation and simulating login to Interne

6, Supports ISP login (username / password) and IP Ping test (WAN PING Test, LAN PING Test)

7. Rechargeable Li-ion Battery

8. Support optical power meter, VFL function

9. Support cable tracing, check line sequence, landline telephone function

10. Support cable fault locator (TDR) function

Specifications

xDSL   Index

xDSL   test main functions

Physical Layer Info
  PPPoP Dial
  FTP Client, Fixative IP
  Network Layer Test
  Modem Emulation
  PING
  Support VLAN,HLOG,QLN
  Error Code Statistics
  Bit Graph Display
  BPT /SNR Data
  Modem Parameter Setting(VPI/VCI)

ADSL Index

Standards

ITU G.994.1 (G.hs), ITU G.992.5, ITU   G.992.5 Annex L. The max distance which can be connected is 6.5km. Be   compatible with ADSL, ADSL2 and READSL.

Attenuation:

0~63.5dB

Noise margin

0~32dB

Upstream Channel Rate (interweaved /   fast mode)

0~1.2Mbps

Downstream Channel Rate (interweaved   / fast mode)

0~24Mbps

The modulating bits in the DMT   sub-channel

0~15 and each sub-channels'   frequency points

The number of error codes

CRC, HEC, FEC, NCD, OCD

Other Parameters

The output power of DSL

It can display every condition of   the DSL line: lost signal and shutdown of link

VDSL2 Index

Standards

ITU G.993.2(VDSL2).Be compatible   with ADSL2+, ADSL standard.

Upstream Channel Rate (interweaved /   fast mode)

0-100M

Downstream Channel Rate (interweaved   / fast mode)

0-100M

The modulating bits in the DMT   sub-channel

0~15 and each sub-channels'   frequency points

The number of error codes

CRC, HEC, FEC, NCD, OCD

Other   Parameters

The output power of DSL
  It can display every condition of the DSL line: lost signal and shutdown of   link
  DSLAM information
  Error seconds
  INP pulse protection
  SNR channel figure
  Channel noise margin figure                                                                                              

Support profiles:

Profile   8a, 8b, 8c, 8d, 12a, 12b, 17a

DMM Test   Index

DC Voltage

-400 to 400 V; Resolution: 0.1V

AC Voltage

0 to 290 V

Capacitance

0 to 1000nF; Accuracy: 0-10nF:   ±2nF, 10nF-1000nF: ±2 %±2nF

Loop Resistance

0 to 20KΩ; Accuracy: 0-100: ±3%±4Ω, 100-500: ±3%, 500-20 KΩ: ±2%

Insulation Resistance

0 to 50MΩ; Accuracy: 0-1.0M: ±0.1 MΩ, 1.0-30M: ±10%±0.5 MΩ

TDR Index

General   specifications

Check line   mix and break fault.

Auto and   manual distance test

Test Range

8km(4km,16km,32km   is optional)

Highest   resolution

1km

Dead   Zone

0m

Power   consumption

1W

VOP   Adjusting range

100-300 m/us

Distance   test accuracy

1m

Pulse test   voltage range

30V

Cable   Tracking Index

Test   cable type

Network   cable, twisted pair cable, telephone line, USB cable, coaxial cable.

Line   status test

Determine   open or short circuit

Voltage   polarity detection

Positive   and negative of DC voltage

Distance   of signal transmission

No   less than 3km

DC   Voltage

No   more than 48V

Check Line   Sequence Index

Function

Support generate network   line signal to view the network check line sequence with the receiver

Feature

Easy to operate:   determine the line sequence by receiving side lights order

Optical   Power Index

Wavelength range(nm)

800~1700

Photosensing material

InGaAs

Power test range(dBm)

-70~+10 or -50~+26

Error range

±5%

Display distinguishability

Linear display: 0.1%;logarithmic   display: 0.01 dBm

 Adapters

FC, ST, SC

VFL   Index

VFL

FP-LD

Wavelength

650nm±20nm

Output   power

1mw/3mw/5mw/10mw (optional

Connector

2.5mm universal adapter(SC, FC, ST)

Working mode

CW or 2Hz modulation

Applicable   fiber

SM / MM

Main Interface

s600界面.jpg

Order Information


Ordering   Information

Module   Code

Standard / Basic Part

ADSL;   ADSL2; ADSL2+; READSL; VDSL2 function

 

S600

DMM   function

D

TDR-4KM   (8km,16km optional)

4

Optical   Power Meter Module

G

VFL   Module

H

Cable   Tracing

X

Check   Line Sequence

W

Landline   Telephone

T






 

Inquiry