Handheld FTTx Splicer

ST3100F apply to bare fibers, drop cables and jumper wires splicing; 250 times magnification of fiber cores; 7s fast splicing, 26s intelligent heating; 4400mAh Li-battery, 220 cycels splicing and heating; More than 4000 times electrodes discharging.

Product Details

Overview

Apply to bare fibers, drop cables and jumper wires splicing; 250 times magnification of fiber cores; 7s fast splicing, 26s intelligent heating; 4400mAh Li-battery, 220 cycels splicing and heating; More than 4000 times electrodes discharging.

Features

◆ Small, light, long battery life

◆ 4 motors accurate core alignment

◆ 250 times magnification of fiber cores

◆ 7s fast splicing, 26s intelligent heating

◆ More than 4000 times electrodes discharging

◆ 4400mAh Li-batery, 220 cycels splicing and heating

◆ Inductive automatic heater, not heating without fibers

◆ 3 in 1 multi-function clamps, new waterproof structure

◆  Apply to bare fibers, drop cables and jumper wires splicing

ST3100FF



Specification

Applicable   fiber

SM(G.652),   MM(G.651), DS(G.653), NZDS(G.655), others(including G.657)

Applicable   fiber

SM(ITU-T   G.652),MM(ITU-T G.651),DS(ITU-T G.653),NZDS(ITU-T G.655)

Diameter   of cladding

80 -150μm

Diameter   of coating

160 – 900μm

Typical   splice loss

SM:0.02dB,   MM:0.01dB, DS:0.04dB, NZDS:0.04dB

Return loss

>60db

Fiber cleaved length

10-16mm   (coating diameter< 250μm   ), 16mm(coating diameter: 250-1000μm )

Splicing program

40 groups

Operate mode

Manual, Automatic

Auto-heating

Available

Typical   splicing time

7seconds

Tube heating time

26 seconds for 60mm and 40mm shrinkable sleeves

Fiber view magnification

250X(X or Y view), 125X(X and Y view)

Viewing method and display

2 CMOS cameras, 4.3 inch color LCD monitor

Storage of splice result

4000 results

Loss evaluation

Available

Tension test

1.8-2.2N

Interface

GUI menu interface, easier operation

Battery capacity

4400mAh   Li-battery, typical 220 cycles(splice and tube heat)

Power  supply

Adaptor,   input: AC100-240V(50/60HZ),output: DC11-13.5V

Electrode life

More  than 4000 ARC discharges, can be replaced conveniently

Terminals

USB 2.0   port, for uploading splice results and upgrading software

Operating  condition

Altitude: 0-5000m, Humidity: 0-95%, Temperature: -10℃~+50℃;Wind speed: max 15m/s

Dimension

200mm(L)x123mm(W)x95mm(H)

Weight

1.6kg including battery

Package

Packed   in carton with protection foam, Size 43cm*37cm*27cm, G.W.6.3kg


ST3100D22

Inquiry